Just to switch the Power ON / OFF button to the ON side to turn on the self-leveling mode. Press the “OD” button on the top to turn on the manual mode and project lines in any position or angle.
Tag Archives: leveling
CIGMAN CM-701 Green Laser Level. CIGMAN-701 100ft green laser level is a compact, practical option for basic cross line leveling work. Make your job much easier. Suitable for flooring, tiling, ceiling, molding installation.
This is an excellent spirit level with 360° 16 lines for fine positioning, with self-leveling system, flexible and stable. It is suitable for a variety of uses including flooring, tile layout, paneling, wallpaper, woodwork, baseboards, finishing carpentry, socket and switch layout, wall stud layout and partition installation.
2×360° horizontal and 2×360° vertical, laser level 360 self leveling which can cover all around the room. Moreover, 4×360° laser level can square out an entire room in seconds! It allows to operate the line laser through a remote from anywhere in the room.
Full Layout with 3 x 360 Line Laser? : One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. Two vertical lines cross at 90° angles makes user quickly visualize and square the layout.
With a visual distance of up to 65 ft or 200 ft under Pulse mode. This floor laser level is ideal for indoor spaces. 2 horizontal plane and 2 vertical planes, 90 degrees apart, provide all the reference required for a wide variety of interior applications.
Three touching buttons design, one OUTDOOR/Open button, one V button, and one H button, the oblique line, horizontal line and vertical line with a clear division. Self-leveling function can conquer small rugged place such as 3°, over 3° the laser light will keep blinking to remind you to put it on a flat place.
Item is New open box as seen in photos.
One 360° horizontal and two 360°vertical laser lines can be selected individually depends on job site applications. Two vertical lines cross at 90°angles makes user quickly visualize and finish square layout.
Tested and completely working with original parts and components in original box. All lasers appear to operate as expected with no problems.