Huepar P03CG 12 Lines Green Laser Level Specifications. Laser Beam: Green Beam. Projection: 12 Green Laser Lines. Laser Class: Class 2 (IEC/EN60825-1/2014). Laser Wavelength: Germany Osram 510nm-530nm. Horizontal / Vertical Accuracy: ±3mm/10m, ±1/9 in. Working Distance: =20m, =40m with detector. Working Time: About 9 hours with li-ion battery. Power Source:Li-ion Battery 11.1V(12.6V Max) 2600mAh. Mount Size: 1/4”-20 & 5/8”-11. Operating Temperature: Between -10? Storage temperature: Between -20? 1 x Huepar P03CG Cross Line Laser Level. 1 x Bluetooth Remote Control. 1 x Rechargeable Li-ion Battery. 1 x Power Adapter. 1 x Type-C cord. 1 x Green Target Plate. 1 x Magnetic Bracket. 1 x User Manual. 1 x Hard Carry Case. Short press H and V button on the keypad to switch the Horizontal and Vertical laser lines separately. The laser lines can be selected separately according to job requirements. Bluetooth & Remote control. The App and remote control can switch ON/OFF the laser lines and pulse mode, select the laser planes. Huepar App also provides out-of-level alarm. The laser tool can connect two Bluetooth devices simultaneously. With the remote control, your alignment job becomes simple and fast. Large capacity Li-ion battery. 10.8V / 2600mAh Li-ion battery and provides 10 hours running time. The Li-ion battery pack can be quick to release and install is very easy to use. The Li-ion Battery can be charger separately and the four power indicators on the battery allow users to know the charging status. When taking out the battery, the cross line laser level can be used at the job site by plugged in directly. When the pendulum slides to the” ON” position, the self-leveling mode is enabled. The laser beam will beep as well as the laser beam blink fast when the tool is out of self-leveling range ±4°. When the pendulum is in the middle position, the laser tool can be placed for use at any angle. The laser beam will blink every 3-5 seconds to remind you it’s not self-leveling now. The locked icon will be displayed on Huepar APP to remind user it is in manual mode now. Huepar Laser Level have one horizontal 360° plane, two vertical 360° planes, 12 laser lines, which can cover the floor, walls and ceiling all around the room. Horizontal lines and vertical lines cross at 90°angles help you to visualize quickly and finish square layout. Each button on this laser level corresponds to a single laser line, you can easily choose to turn on/off any laser line. After power on, short press the power button to switch ON/OFF the pulse mode. When connecting with Huepar APP and the Bluetooth Remote Control, the pulse mode can be switched ON/OFF via APP and remote control. Pulse mode extends the working range up to 200Ft in brighter working conditions when using with Huepar Line Laser Receiver. It is compatible with Huepar LR-6RG / LR-5RG Laser Detector only. Note: Keep the pulse mode on when using with a receiver. This laser tool utilizes the included large capacity lithium battery Direct input charging: This laser tool can be used at job site with direct input charging even if take out the battery. Charging protection help prevent the tool from overcharge. This green line laser offers 1/4″-20 and 5/8″-11 mounting threads for being fixed on tripod or magnetic bracket. The strong magnetic bracket allows for quick positioning to metal surfaces helping hang the laser level for wall applications and can be rotated to the required angle. The magnetic base also has 1/4″-20 & 5/8″-11 mounting threads to suit for different tripod threads.