[Fully Layout with 3 x 360° Line Lasers] With this Huepar line laser, users can cover the walls, ceiling, and floor of the entire room using one 360° horizontal plane and two 360° vertical planes. The three laser lines can be chosen separately based on the applications used on the job site. This laser-level instrument self-levels and indicates out-of-level conditions using our smart pendulum mechanism while the pendulum is unlocked. Once the pendulum is locked, it changes to manual mode, allowing you to lock lines at any angle. [Dual Power Methods and Charging Port] A large-capacity 3.7V/5200mAh lithium battery that lasts up to 8 hours. A Type-C charging connector that allows for separate charging is included with the lithium battery. The laser tool can be plugged in and utilized on the job site after the battery is removed. Users may monitor the current battery volume with the keypad’s four battery indicators, and charge protection helps guard against overcharging. [Brighter Green Laser and Outdoor Pulse Mode] The bright Osram green laser unit, which has greater stability and resistance to temperature changes, is used in this cross-line laser. With an accuracy of ±1/9 inch at 33 feet and an operating range of up to 85 feet (300LUX), the green laser is twice as bright as the red laser at the same power. With the Huepar line laser detector, the laser range can be extended up to 200 feet by pressing the pulse mode button to enter the outside pulse mode. [Installation Methods] The laser level has a 1/4-inch-20 thread that fits standard tripods and laser mounting poles. The laser tool has a magnetic pivoting base that allows it to be turned to the desired angle. Furthermore, the 1/4-inch-20 and 5/8-inch-11 mounting threads allow it to be attached to various tripod threads. Steel and metal tracks can be attached with the help of two powerful magnets. 2 nail holes, so you may work with more fixing techniques. A screwdriver can be used to remove and replace the laser windows.