CIGMAN CM701 Laser Level. CIGMAN-701 100ft green laser level is a compact, practical option for basic cross line leveling work. Make your job much easier. It is reliable and tough for professional too users at various job sites. Suitable for flooring, tiling, ceiling, molding installation. Help you with Home Decoration, Wall Construction, Bridge Construction, Engineering Construction, Railway Construction, etc. The green laser level line is 4x brightness than the red beam. Thanks to the high-brightness green laser, it can provide a working distance of up to 30m. The accuracy at 5m is ±1.5mm, which makes users feel confident in their alignment work. When the laser tool is switched to the unlocked position, self-leveling mode is enabled. The laser beam will blink continuously when the tool is beyond self-leveling range (4°±1°). When the pendulum locked, you can place the laser tool at any angle to project non-level straight lines. In the self-leveling mode, you can enter the pulse mode, the indicator light will keep flashing. This mode is invalid in power saving mode. When you open pulse mode, you can use a laser receiver(not included) to carry out leveling at long distances or when the laser beams are not visible. This 3×360° laser level can cover the ceiling, walls and floor, allowing you to easily complete the layout of the entire room. Each button on this laser level corresponds to a single laser line, you can easily choose to turn on/off any laser line. With the remote control, your alignment job becomes simple and fast. Type-C charging saves you the trouble of changing batteries. When there is only one power indicator, the machine is in a low-energy state, please charge it in time. CIGMAN CM701 Laser Level has two modes and switching modes is very easy. Unlock the pendulum to switch to the Self-Leveling mode, the laser level will self-level within 4°(otherwise the laser will keep flashing). Lock the pendulum to switch to the manual mode, meet your alignment needs from different angles. 360° Strong Magnetic Pivoting Base. 1/4” Screw Hole: Work on the tripod or woke on the stand supplied. The included two brackets can meet your different measurement needs. Allows for attachment to metal track and steel, supporting you to turn the laser level around at 360 degree, projecting lines at any angle. CIGMAN KT-100P Laser Tripod Telescoping Pole. Professional Laser Level Elevating Tripod with 12.18ft Telescopic Rod. It also has a good waterproof function, you don’t have to worry about it being damaged by water. The product size is designed to be relatively small and easy to carry.