S03DG 3 x 360° Green Beam Floor Laser Level with LCD Screen Specifications. Laser Class: Class 2 (IEC/EN60825-1/2014). Number of Lines: One 360° horizontal floor laser line&Two Vertical 360° laser lines. Screen Type: LCD screen with backlight. Laser Wavelength: 505-520nm. Horizontal/Vertical Accuracy: ±1/9 inch at 33Ft. Leveling/Compensation Range: ±3.5°. Working Distance (Line): 130Ft (100 LUX), 200Ft. With Huepar Receiver LR-5RG/LR-6RG. Power Source: Li-ion battery & 4×AA (LR6) batteries. Operating Time: with Lithium Battery: 7 hours with all laser beams on; with AA Batteries: 1.5 hours with all laser beams on. Mount Size: 1/4-20. 1 x 3D Green Tiling Laser Level with LCD screen S03DG. 1 x Bluetooth Remote Control. 1 x Rechargeable Li-ion Battery. 1 x Power Adapter&1 x Type-C cord. 4 x AA (LR6) Batteries & 1 x AA Battery Holder. 1 x Magnetic Bracket&1 x Steel Sheet. 1 x Lifting Base. 1 x Laser Target Plate. 1 x Lase Level User Manual. 1 x Hard Carry Case. Short press the “H” and “V” buttons on the keypad to switch the Horizontal and Vertical laser lines separately. The Bluetooth remote control / Huepar APP enables to select three 360° laser lines individually at a distance up to 98Ft. The laser line(s) can be temporarily turned OFF by the remote control/Huepar APP when need to leave for a while. In manual mode, when all laser lines are switched off, the laser tool will shut OFF automatically after about 5 minutes of inactivity. The laser tool can connect two Bluetooth devices simultaneously. Huepar S03DG laser level has LCD screen to easily get the status of the battery, angle, pendulum and pulse mode on the display. Icons on LCD screen: battery level, pendulum locked&unlocked status, X axis tilt angle, Y axis tilt angle, X/Y axis tilt direction, pulse mode. 360° Horizontal Tiling Laser&Lifting Base. Huepar S03DG floor laser tool generates one 360°horizontal tiling laser on the floor or wall providing all-around leveling coverage for the layout of tile, stone, brick, carpet and hardwood flooring. With the lifting base, the laser lines raise from the surface to project over and travel past uneven surfaces or obstructions between 1″ and 3.54″ height. After power on, short press the power button to switch ON/OFF the pulse mode. When connecting with Huepar APP and the Bluetooth Remote Control, the pulse mode can be switched ON/OFF via APP and remote control. Pulse mode extends the working range up to 200Ft in brighter working conditions when using with Huepar Line Laser Receiver. It is compatible with Huepar LR-6RG / LR-5RG Laser Detector only. Note: Keep the pulse mode on when using with a receiver. Once the pendulum unlocked, the self-leveling mode is enabled. The laser beam will beep as well as the laser beam blink fast when the tool is out of self-leveling range ±3.5°. With Bluetooth Tech, the locked icon will be displayed on Huepar APP and LCD screen. When the pendulum is in the locked position, the laser tool can be placed for use at any angle. The laser beam will blink every 3-5 seconds to remind you it’s not self-leveling now. With Bluetooth Tech, the locked icon will be displayed on Huepar APP and LCD screen to remind user it is in manual mode now. This laser tool utilizes the included large capacity Li-ion battery which is compatible with Samsung SB-L110 battery. Huepar 360 laser level also comes with a holder for installing 4 AA batteries to use the tool. The 12 lines laser level can be used at the work site by plugged in directly when taking out the battery. With Type-C charging port, the laser level can also be charged by laptop, power bank, car charger, etc. The included strong magnetic bracket allows for quick positioning to metal surfaces, helping hang the laser level for wall applications. The four fine-tuning knobs on the bracket enable adjustment of the left and right position, front and back position within 4.8 in (12cm) and the vertical angle against the wall. The laser tool comes with the 1/4-20 mount thread to suit a standard tripod or pole mount.
Huepar 12 Lines Self-Leveling Green Beam Tiling Floor Laser Tool with Bluetooth
S03DG 3 x 360° Green Beam Floor Laser Level with LCD Screen Specifications. Laser Class: Class 2 (IEC/EN60825-1/2014). Number of Lines: One 360° horizontal floor laser line&Two Vertical 360° laser lines. Screen Type: LCD screen with backlight. Laser Wavelength: 505-520nm. Horizontal/Vertical Accuracy: ±1/9 inch at 33Ft. Leveling/Compensation Range: ±3.5°. Working Distance (Line): 130Ft (100 LUX), 200Ft. With Huepar Receiver LR-5RG/LR-6RG. Power Source: Li-ion battery & 4×AA (LR6) batteries. Operating Time: with Lithium Battery: 7 hours with all laser beams on; with AA Batteries: 1.5 hours with all laser beams on. Mount Size: 1/4-20. 1 x 3D Green Tiling Laser Level with LCD screen S03DG. 1 x Bluetooth Remote Control. 1 x Rechargeable Li-ion Battery. 1 x Power Adapter&1 x Type-C cord. 4 x AA (LR6) Batteries & 1 x AA Battery Holder. 1 x Magnetic Bracket&1 x Steel Sheet. 1 x Lifting Base. 1 x Laser Target Plate. 1 x Lase Level User Manual. 1 x Hard Carry Case. Short press the “H” and “V” buttons on the keypad to switch the Horizontal and Vertical laser lines separately. The Bluetooth remote control / Huepar APP enables to select three 360° laser lines individually at a distance up to 98Ft. The laser line(s) can be temporarily turned OFF by the remote control/Huepar APP when need to leave for a while. In manual mode, when all laser lines are switched off, the laser tool will shut OFF automatically after about 5 minutes of inactivity. The laser tool can connect two Bluetooth devices simultaneously. Huepar S03DG laser level has LCD screen to easily get the status of the battery, angle, pendulum and pulse mode on the display. Icons on LCD screen: battery level, pendulum locked&unlocked status, X axis tilt angle, Y axis tilt angle, X/Y axis tilt direction, pulse mode. 360° Horizontal Tiling Laser&Lifting Base. Huepar S03DG floor laser tool generates one 360°horizontal tiling laser on the floor or wall providing all-around leveling coverage for the layout of tile, stone, brick, carpet and hardwood flooring. With the lifting base, the laser lines raise from the surface to project over and travel past uneven surfaces or obstructions between 1″ and 3.54″ height. After power on, short press the power button to switch ON/OFF the pulse mode. When connecting with Huepar APP and the Bluetooth Remote Control, the pulse mode can be switched ON/OFF via APP and remote control. Pulse mode extends the working range up to 200Ft in brighter working conditions when using with Huepar Line Laser Receiver. It is compatible with Huepar LR-6RG / LR-5RG Laser Detector only. Note: Keep the pulse mode on when using with a receiver. Once the pendulum unlocked, the self-leveling mode is enabled. The laser beam will beep as well as the laser beam blink fast when the tool is out of self-leveling range ±3.5°. With Bluetooth Tech, the locked icon will be displayed on Huepar APP and LCD screen. When the pendulum is in the locked position, the laser tool can be placed for use at any angle. The laser beam will blink every 3-5 seconds to remind you it’s not self-leveling now. With Bluetooth Tech, the locked icon will be displayed on Huepar APP and LCD screen to remind user it is in manual mode now. This laser tool utilizes the included large capacity Li-ion battery which is compatible with Samsung SB-L110 battery. Huepar 360 laser level also comes with a holder for installing 4 AA batteries to use the tool. The 12 lines laser level can be used at the work site by plugged in directly when taking out the battery. With Type-C charging port, the laser level can also be charged by laptop, power bank, car charger, etc. The included strong magnetic bracket allows for quick positioning to metal surfaces, helping hang the laser level for wall applications. The four fine-tuning knobs on the bracket enable adjustment of the left and right position, front and back position within 4.8 in (12cm) and the vertical angle against the wall. The laser tool comes with the 1/4-20 mount thread to suit a standard tripod or pole mount.